The first 3D printed house will soon be a reality in the Czech Republic. With this new construction technique, a home can be built up to seven times faster and at half the cost.
With three rooms and a ground area of 43 square metres, the house is built layer by layer using a robotic arm from the automotive industry. This prints a special concrete mix with plastic fibres and hardeners. In this way, an inner and outer wall are made between which insulation material can be inserted if necessary.
Round shapes
Within 24 hours, the concrete has the strength of a standard foundation and after 28 days it is fully cured. The demonstration house is made on a floating pontoon with a wooden deck around it. Inside, there is space for two people with a bedroom, living room/kitchen and bathroom.
Assymetric walls symbolise the aesthetics of 3D printed homes. Straight corners and lines are absent to give way to flowing shapes. Eco-technology is used for the interior design: recirculating showers, green roof and tanks for drinking water, water and wastewater come as standard.
The video below presents the architect behind the project.